| 126 | 6 | 29 |
| 下载次数 | 被引频次 | 阅读次数 |
采用一闪速炉模型,用石英沙模拟不同气流量和投料量下中央扩散型精矿喷嘴的颗粒分布情况,用偏析函数px和反应塔中间区域颗粒质量分数xcent来反映颗粒的分散情况。结果表明,颗粒随工艺风的增加向中心聚集、随分散风的增加向四周分散。要使颗粒分散较好,需要工艺风和分散风对颗粒作用效果相匹配,高强度闪速熔炼需减小工艺风对颗粒向下的作用力。
Abstract：With a flash furnace model,sand is used to simulate particle distribution of central diffuse type concentrate burner under different gas flows and feed rates.The segregation function px and particle mass percent of central area xcent were adopted to reflect particle dispersion.The results show that particles are gathered to central area with increase of process air,and dispersed with increase of distribution air.A suitable match between process air and distribution air facilitates particle dispersion well.Reduction of vertical force of process air is necessary for high intensity flash smelting.
[1]Boryczko B,Donizak J,Hoida A,et al.Comparison of shaft and flash smelting processes of copper production using thermo-ecological cost method[C]//Frangopoulos C A,Rakopoulos C D,Tsatsaronis G.ECOS 2006 proceedings of the 19th International Conference on Efficiency.Cost,Optimization.Simulation and Environmental Impact of Energy Systems.Aghia Pelagia.GREECE,2006:663-668.
[2]杨述凯,齐红斌.杨贵严.等.金川铜闪速炉单喷嘴运行实践[J].有色金属(冶炼部分),2013(2):14-1 6.
[3]王伟,王智.金川镍闪速炉中央混合型反调节式精矿喷嘴的研究[J].有色金属(冶炼部分),2000(5):9-11.
[4]Varnas S R,Truelove J S.Simulating radiative transfer in flash smelling furnaces Original[J].Applied Mathematical Modelling,1995,19:456-464.
[5]Ahokainen T,Jokilaakso A.Numerical simulation of the outokumpu flash smelting furnace reaction shaft Original[J].Canadian Metallurgical Quarterly,1998,37:275-283.
[6]Christopher B S,Frank R A J.Peter TLK,et al.CFD modelling of the flow and reactions in the Olympic Dam flash furnace smelter reaction shaft[J].Applied Mathematical Modelling,2006,30:1310-1325.
[7]Alkatsev M I,Mamontova E E,Mamontov D V.An investigation of certain regularities of oxygen-flash smelting of copper sulfide concentrates using computer simulation[J].Russian Journal of Non-Ferrous Metals,2008,49:336-339.
[8]黄国道.宋冬根,杨平,等.金隆铜业闪速炉余热锅炉炉型的改造与优化[J].有色金属(冶炼部分).2013(2):38-42.
[9]Li Xin-feng,Peng Shi-heng,Han Xiang-li,et al.Influence of operation parameters on flash smelting furnace based on CFD[J].Journal of University of Science and Technology,2004,11(2):115-119.
[10]Chen Z,Wang Y X.Simulation study of intensified flash smelting process[C].Dipl.Ing.Jens Harre.GDBM.Copper 2010.Hamburg.Germany:Papierflieger,2010:1313-1323.
[11]Debrincat D P,Solnordal C B,Van Deventer J S J.Influence of particle properties on the size of agglomerated metallurgical powders[J].Miner Process,2008,87:17-27.
[12]Solnordal C B,Jorgensen F R,Koh P T,et al.CFD modelling of the flow and reactions in the Olympic Dam flash furnace smelter reaction shaft[J].Applied Mathematical Modeling,2006,30:1310-1325.
[13]Xia J L,Ahokainen T,Kankaanpaa T,et al.Flow and heat transfer performance of slag and matte in the settler of a copper flash smelting furnace[J].Steel Research International,2007,78(2):155-159.
[14]Higgins D R,Gray N B,Davidson M R.Simulating particle agglomeration in the flash smelting reaction shaft Original[J].Minerals Engineering,2009,22(14):1251-1265.
[15]Koh P T L,Jorgensen F R A,Elliot B J.Solids falling in flash furnace burner concentrate chutes[J].International Journal of Mineral Processing,2007,83:81-88.
[16]GUIWei-hua,WANG Ling-yun,YANG Chun-hua,et al.Intelligent prediction model of matte grade in copper flash smelting process[J].Transactions of Nonferrous Metals Society of China,2007,17(5):1075-1081.
[17]Eksteen J J.A mechanistic model to predict matte temperatures during the smelting of UG2-rich blends of platinum group metal concentrates[J].Minerals Engineering,2011,24(7):676-687.
[18]C(u|¨)neyt Arslan,Fatma Arslan.Recovery of copper,cobalt,and zinc from copper smelter and converter slags[J].Hydrometallurgy,2002,67:1-7.
基本信息:
中图分类号:TF811
引用信息:
[1]艾元方,汤才铄,孙彦文,等.精矿喷嘴粒子分散特性研究[J].有色金属(冶炼部分),2014(10):5-10.
基金信息:
国家高技术研究发展计划(863计划)项目(2010AA065200); 中南大学中央高校基本科研业务费专项资金项目(2012zzts087)
2014-10-12
2014-10-12