nav emailalert searchbtn searchbox tablepage yinyongbenwen piczone journalimg journalInfo journalinfonormal searchdiv searchzone qikanlogo popupnotification paper paperNew
2024, 03, 103-107
熔体过热度对Zr基非晶合金力学性能和热稳定性的影响
基金项目(Foundation): 国家自然科学基金资助项目(52061024,52161027); 甘肃省自然科学基金资助项目(21JR7RA260); 兰州理工大学红柳优秀青年人才支持计划项目
邮箱(Email):
DOI: 10.3969/j.issn.1007-7545.2024.03.014
投稿时间: 2023-11-01
投稿日期(年): 2023
修回时间: 2023-11-07
终审时间: 2023-11-13
终审日期(年): 2023
审稿周期(年): 1
发布时间: 2024-02-20
出版时间: 2024-02-20
移动端阅读
摘要:

采用吸铸法制备Zr70Cu13.5Ni8.5Al8非晶合金,采用同步差示扫描量热仪(DSC)和万能试验机对非晶合金显微结构进行表征和力学性能测试,并利用XRD和SEM对试样的相组成和剪切带观察。研究发现:随着吸铸功率增加,热稳定性、玻璃形成能力不断提高;Zr70Cu13.5Ni8.5Al8非晶合金的锯齿流变现象越明显,综合力学性能越好,其中吸铸功率8 kW时,试样的屈服强度、抗压强度和塑性达到最值,室温综合力学性能最好,且剪切带分布情况最好,但是继续提高吸铸功率,力学性能反而变差。

Abstract:

Zr70Cu13.5Ni8.5Al8 amorphous alloy was prepared by suction casting method.The microstructures and mechanical properties of the amorphous alloy were characterized and tested by differential scanning calorimeter(DSC)and universal testing machine respectively.The phase composition and shear bands of the sample were observed by XRD and SEM.The results show that with the increase of casting power, the thermal stability and glass forming ability are improved continuously.The more obvious the rheological phenomenon of Zr70Cu13.5Ni8.5Al8 amorphous alloy, the better the comprehensive mechanical properties.When the casting power is 8 kW,the yield strength, compressive strength and plasticity of the sample reach the highest value, the comprehensive mechanical properties at room temperature are the best, and the shear band distribution is the best.However, the mechanical properties deteriorate as the casting power continues to increase.

参考文献

[1] 时博,王金辉,魏福安.金属玻璃自由体积理论的研究概述[J].材料导报,2019,33(7):146-151.SHI B,WANG J H,WEI F A.Research overview of free volume theory of metallic glass[J].Materials Review,2019,33(7):146-151.

[2] 张峰,游小刚,谭毅,等.熔体过热处理对FGH4096镍基高温合金纯净化行为及凝固组织的影响[J].机械材程,2022,46(11):10-19.ZHANG F,YOU X G,TAN Y et al.Effect of melt superheat treatment on pure purification behavior and solidification structure of FGH4096 nickel-based superalloy[J].Mechanical Materials Engineering,2002,46(11):10-19.

[3] NOVAK L,POTOCKY L,LOVAS A,et al.Influence of the melt overheating and the cooling rate on the magnetic properties of Fe83.4B16.6 amorphous alloys[J].Journal of Magnetism and Magnetic Materials,1980,19(1/2/3):149-151.

[4] 赵燕春,寇生中,王仁军,等.熔体过热水平对Cu36Zr48Ag8Al8块体非晶合金热稳定性和力学性能的影响[J].稀有金属材料与工程,2011,40(1):176-179.ZHAO Y C,KOU S Z,WANG R J,et al.Effect of overheated level on thermal stability and mechanical properties of Cu36Zr48Ag8Al8 bulk metallic glass[J].Rare Metal Materials and Engineering,2011,40(1):176-179.

[5] LIU G Q,KOU Z S,LI C Y,et al.Effect of casting temperature on mechanical properties and microstructure of Zr53.9Cu29.4Ni4.9Al9.8Fe2 bulk metallic glass[J].Rare Metal Materials and Engineering,2012,41(11):1891-1895.

[6] LIN X H,JOHNSON W L,RHIM W K.Effect of oxygen impurity on crystallization of an undercooled bulk glass forming Zr-Ti-Cu-Ni-Al alloy[J].Materials Transactions,1997,38(5):473-477.

[7] 赵丽.Nb9Fe72Ti4C2B13合金过热熔体的过冷度及其对非晶形成能力和磁性能的影响[J].功能材料,2018,49(4):4046-4053.ZHAO L.Subcooling degree of superheated melt of Nb9Fe72Ti4C2B13 alloy and its effect on amorphous forming ability and magnetic properties[J].Journal of Functional Materials,2018,49(4):4046-4053.

[8] NISHIYAMA N,INOUE A.Supercooling investigation and critical cooling rate for glass formation in Pb-Cu-Ni-P alloy[J].Acta Materialia,1999,47(5):1487-1495.

[9] ZHU Z W,ZHENG S J,ZHANG H F,et al.Plasticity of bulk metallic glasses improved by controlling the solidification condition[J].Journal of Materials Research,2008,23(4):941-948.

[10] LAD K N,PRATAP A,RAVAL K G.Estimation of the free energy change on crystallization of multicomponent glass forming alloys[J].Journal of Materials Science Letters,2002,21(18):1419-1422.

[11] 张震,吕书林,吴树森,等.B2-CuZr相增强非晶复合材料组织调控研究进展[J].稀有金属材料与工程,2023,52(6):2254-2263.ZHANG Z,LYU S L,WU S S,et al.Research progress on microstructure regulation of B2-CuZr phase reinforced amorphous composites[J].Rare Metal Materials and Engineering,2023,52(6):2254-2263.

[12] ALTOUNIAN Z,BATALLA E,STROMOLSEN J O,et al.The influence of oxygen and other impurities on the crystallization of NiZr2 and related metallic glasses[J].Journal of Applied Physics,1987,61(1):149-155.

[13] 胡翼,王永善,李培友.Zr-Al-Cu-Ni-Y大块非晶合金热力学及力学性能研究[J].陕西理工大学学报(自然科学版),2021,37(3):7-12.HU Y,WANG Y S,LI P Y.Study on thermodynamic and mechanical properties of Zr-Al-Cu-Ni-Y bulk amorphous alloy[J].Journal of Shaanxi University of Technology(Natural Science Edition),2021,37(3):7-12.

基本信息:

DOI:10.3969/j.issn.1007-7545.2024.03.014

中图分类号:TG139.8

引用信息:

[1]张香云,张博循,肖才云,等.熔体过热度对Zr基非晶合金力学性能和热稳定性的影响[J].有色金属(冶炼部分),2024(03):103-107.DOI:10.3969/j.issn.1007-7545.2024.03.014.

基金信息:

国家自然科学基金资助项目(52061024,52161027); 甘肃省自然科学基金资助项目(21JR7RA260); 兰州理工大学红柳优秀青年人才支持计划项目

投稿时间:

2023-11-01

投稿日期(年):

2023

修回时间:

2023-11-07

终审时间:

2023-11-13

终审日期(年):

2023

审稿周期(年):

1

发布时间:

2024-02-20

出版时间:

2024-02-20

检 索 高级检索

引用

GB/T 7714-2015 格式引文
MLA格式引文
APA格式引文