| 808 | 10 | 92 |
| 下载次数 | 被引频次 | 阅读次数 |
高冰镍浸出渣是镍湿法冶金过程的重要中间产物,含有铜、镍、钴和金、银、铂、钯等有价金属,具有重要的综合回收价值。探究高冰镍浸出渣冶金过程多金属的走向行为对于提高金属综合回收率、优化系统物料平衡和推动工艺技术升级具有重要意义。基于新疆阜康冶炼厂高冰镍浸出渣的典型冶金工艺,结合文献调研和工业生产实践,阐释高冰镍浸出渣中主要金属铜、镍、钴、铁和贵金属金、银、铂、钯的迁移走向,揭示各金属形态变化历程,分析各金属在渣相和液相的分配行为,为工艺设计和优化提供支撑。
Abstract：High nickel matte leaching residue is an important intermediate product of nickel hydrometallurgy process.It contains valuable metals such as copper,nickel,cobalt,gold,silver,platinum and palladium,which has important comprehensive recovery value.Exploring distribution behavior of multi metals in metallurgical process of high nickel matte leaching residue has great significance for improving comprehensive metal recovery,optimizing material balance of the system and promoting upgrading of process technology.Based on typical metallurgical process of high nickel matte leaching residue from Fukang Refinery in Xinjiang,combined with literature investigation and industrial production practice,migration trend of main metals of copper,nickel,cobalt,iron and precious metals gold,silver,platinum and palladium in high nickel matte leaching residue were explained,morphological change process of each metal was revealed,and distribution behavior of each metal in residue and solution was analyzed.It can provide support for process design and optimization.
[1]黄振华，林江顺，王忠，等．对我国电镍生产工艺的分析与改进研究[J]．有色金属（冶炼部分），2013(6):1-5.HUANG Z H,LIN J S,WANG Z,et al.Analysis of nickel production technology and its improvement study[J].Nonferrous Metals(Extractive Metallurgy),2013(6):1-5.
[2]赵磊，刘大星．高铜硫化镍阳极电解工艺中阳极液净化工艺研究[J]．有色金属（冶炼部分），2012(10):7-9.ZHAO L,LIU D X.Study on anolyte purification process of anodic electrolyte of high copper-bearing nickel sulfide[J].Nonferrous Metals(Extractive Metallurgy),2012(10):7-9.
[3]贾玉斌．喀拉通克金属化高冰镍吹炼及水淬工业化的回顾与探讨[J]．新疆有色金属，2003,26(2):23-26.JIA Y B.Review and discussion on converting and water quenching industrialization of metallized high nickel matte in Karatonk[J].Xinjiang Nonferrous Metals,2003,26(2):23-26.
[4]蒋开喜，王玉芳，郑朝振，等．硫化镍加压浸出研究进展与应用[J]．矿冶，2018,27(3):45-50.JIANG K X,WANG Y F,ZHENG C Z,et al.Research development and utilization of pressure leaching on nickel sulfide[J].Mining and Metallurgy,2018,27(3):45-50.
[5]马育新．喀拉通克铜精矿加压酸浸新工艺研究[J]．有色金属，2008,60(3):62-66.MA Y X.Pressure leaching of copper concentrate from Karatungk deposit[J].Nonferrous Metals,2008,60(3):62-66.
[6]游清治．阜康冶炼厂湿法流程中的镍金属总回收率及计算[J]．有色金属（冶炼部分），2003(2):16-19.YOU Q Z.Total recovery rate of nickel metal in wet process of Fukang Refinery and its calculation[J].Nonferrous Metals(Extractive Metallurgy),2003(2):16-19.
[7]陈廷扬．技术创新，完善工艺，提高企业经济效益—阜康冶炼厂铜渣处理工艺简介[J]．新疆有色金属，2002,25(4):27-29.CHEN T Y.Technical innovation,improvement of process and improvement of enterprise economic benefits:Brief introduction to copper slag treatment process in Fukang Refinery[J].Xinjiang Nonferrous Metals,2002,25(4):27-29.
[8]李昌福，黄忠淼，李晔，等．关于阜康铜渣冶炼工艺的研究和选择[J]．矿冶，2003,12(2):53-57.LI C F,HUANG Z M,LI Y,et al.Testing and selection of smelting technology of copper residue from Fukang Refinery[J].Mining and Metallurgy,2002,25(4):27-29.
[9]吴涛．阜康冶炼厂尾渣技改工程工艺论证试验[J]．新疆有色金属，2003,26(3):22-23.WU T.Process demonstration test of tail slag technical transformation project in Fukang Refinery[J].Xinjiang Nonferrous Metals,2003,26(3):22-23.
[10]李春雷．阜康冶炼厂高冰镍湿法精炼工业化回顾[J]．中国有色冶金，2007,36(3):20-24.LI C L.Review on industrialization of the hydrometallurgy for high nickel mattes refining in Fukang Smelter[J].China Nonferrous Metallurgy,2007,36(3):20-24.
[11]张向红．十年弹指一挥间———阜康冶炼厂经济运行状况蒸蒸日上[J]．新疆有色金属，2004,27(4):50-52.ZHANG X H.In ten years,the economic operation of Fukang Smelter is booming[J].Xinjiang Nonferrous Metals,2004,27(4):50-52.
[12]木拉提．二段常压浸出在阜康冶炼厂的应用[J]．新疆有色金属，2008,31(4):52-54.MU L T.Application of two-stage atmospheric pressure leaching in Fukang Smelter[J].Xinjiang Nonferrous Metals,2008,31(4):52-54.
[13]姜惠云．哈密高镍矿在阜冶浸出过程的生产实践[J]．新疆有色金属，2008,31(8):120-121.JIANG H Y.Production practice of Hami high nickel ore in Fuye leaching process[J].Xinjiang Nonferrous Metals,2008,31(8):120-121.
[14]王玉珠．高冰镍中有价金属浸出过程中的研究与探讨[J]．中国化工贸易，2013,5(7):263.WANG Y Z.Study and discussion on the leaching of valuable metals from high nickel matte[J].China Chemical Trade,2013,5(7):263.
[15]赵江．浸出工序中铜的行为[J]．新疆有色金属，2004,27(4):31-32.ZHAO J.Behavior of copper in leaching process[J].Xinjiang Nonferrous Metals,2004,27(4):31-32.
[16]贾玉斌．阜康镍湿法冶金过程的除杂质方法机理分析[J]．新疆有色金属，2003,26(3):24-26.JIA Y B.Mechanism analysis of impurity removal method in Fukang nickel hydrometallurgy process[J].Xinjiang Nonferrous Metals,2003,26(3):24-26.
[17]姜惠云．二段常压浸出在阜冶的生产实践[J]．新疆有色金属，2009,32(1):147-148.JIANG H Y.Production practice of two-stage atmospheric pressure leaching in Fukang Smelter[J].Xinjiang Nonferrous Metals,2009,32(1):147-148.
[18]王鹏伟．金属化高冰镍硫酸选择性浸出工艺中酸铜平衡及生产实践[J]．新疆有色金属，1995,18(4):31-35.WANG P W.Acid copper balance and production practice in sulfuric acid selective leaching process of metallized high nickel matte[J].Xinjiang Nonferrous Metals,1995,18(4):31-35.
[19]许钢．浅析原料铜含量是影响硫酸选择性浸出终渣含镍的重要因素[J]．新疆有色金属，2014,37(7):150-151.XU G.The content of copper in raw material is an important factor affecting the nickel content in the final residue of sulfuric acid selective leaching[J].Xinjiang Nonferrous Metals,2014,37(7):150-151.
[20]宋连民．阜康铜渣精炼工艺与生产实践[J]．新疆有色金属，2002,25(1):33-37.SONG L M.Refining process and production practice of Fukang copper slag[J].Xinjiang Nonferrous Metals,2002,25(1):33-37.
[21]王春海．降低沸腾焙烧残硫率的生产实践[J]．新疆有色金属，2014,37(3):75-78.WANG C H.Production practice of reducing residual sulfur rate of fluidized roasting[J].Xinjiang Nonferrous Metals,2014,37(3):75-78.
[22]李杰．浅谈铜冶炼过程中影响阴极铜质量的因素[J]．新疆有色金属，2014,37(5):127-128.LI J.Factors affecting cathode copper quality in copper smelting process[J].Xinjiang Nonferrous Metals,2014,37(5):127-128.
[23]马俊忠．铜渣焙烧-浸出-电积半湿法工艺中杂质控制的生产实践[J]．新疆有色金属，2005,28(1):18-20.MA J Z.Production practice of impurity control in copper slag roasting leaching electrowinning semi wet process[J].Xinjiang Nonferrous Metals,2005,28(1):18-20.
[24]吴涛．沸腾焙烧炉在铜冶炼生产中的应用[J]．新疆有色金属，2003,26(1):18-19.WU T.Application of fluidized bed roaster in copper smelting production[J].Xinjiang Nonferrous Metals,2003,26(1):18-19.
[25]李江平．沸腾炉焙烧尾渣（铜渣）技改的应用[J]．新疆有色金属，2009,32(1):89-91.LI J P.Application of technical transformation of roasting tailings(copper slag)in fluidized bed furnace[J].Xinjiang Nonferrous Metals,2009,32(1):89-91.
[26]李晔．阜康镍冶炼厂含镍铜渣冶炼工艺研究[J]．矿冶，2000,9(3):59-62.LI Y.Study on smelting process of nickel containing copper slag in Fukang nickel smelter[J].Mining and Metallurgy,2000,9(3):59-62.
[27]李江平．铜渣在沸腾焙烧炉中的生产实践[J]．新疆有色金属，2004,27(4):27-28.LI J P.Production practice of copper slag in fluidized bed roaster[J].Xinjiang Nonferrous Metals,2004,27(4):27-28.
[28]王春海．浅析铜冶炼过程中影响电流效率的因素[J]．新疆有色金属，2008,31(4):64-66.WANG C H.Factors affecting current efficiency in copper smelting process[J].Xinjiang Nonferrous Metals,2008,31(4):64-66.
[29]王英彬．降低铁渣含银浅析[J]．新疆有色金属，2011,34(1):94-95.WANG Y B.Analysis on reducing silver content in iron slag[J].Xinjiang Nonferrous Metals,2011,34(1):94-95.
[30]赵富平．阜康冶炼厂浸铜后渣加压浸出工艺探讨[J]．新疆有色金属，2003,26（增刊2）:43-44.ZHAO F P.Discussion on pressure leaching process of copper leaching residue in Fukang Smelter[J].Xinjiang Nonferrous Metals,2003,26(S2):43-44.
[31]宋连民．阴极铜板面发黑、分层、长刺的工艺探讨[J]．新疆有色金属，2007,30(2):29-30.SONG L M.Discussion on the process of blackening,delamination and thorn growth on the surface of cathode copper plate[J].Xinjiang Nonferrous Metals,2007,30(2):29-30.
[32]崔富晖，牟文宁，顾兴利，等．铜镍氧硫混合矿焙烧-浸出过程铜、镍、铁的转化[J]．中国有色金属学报，2017,27(7):1471-1478.CUI F H,MOU W N,GU X L,et al.Transformation of copper,nickel and iron in roasting leaching process of copper nickel oxygen sulfur mixed ore[J].The Chinese Journal of Nonferrous Metals,2017,27(7):1471-1478.
[33]史文峰．阜冶尾渣中贵金属的提取实践[J]．新疆有色金属，2003,26(3):28-29.SHI W F.Extraction practice of precious metals from tailings of Fukang Refinery[J].Xinjiang Nonferrous Metals,2003,26(3):28-29.
基本信息:
中图分类号:TF815
引用信息:
[1]谢铿,王海北,马育新,等.高冰镍浸出渣冶金过程多金属走向行为探究[J].有色金属(冶炼部分),2021(12):20-27.
基金信息:
国家重点研发计划项目（2019YFC1907403）
2021-11-23
2021-11-23